Restore Raw Metal’s Shine in an Instant with Flitz Brass & Copper Tarnish Remover
Wondering how to clean brass hardware or deal with corroded brass and copper? Flitz Instant Brass & Copper Tarnish Remover will help you shine up raw metal surfaces in a jiffy.
Flitz Instant Brass & Copper Tarnish Remover lets you effortlessly remove heavy tarnish, oxidation, rust, and water stains from brass, copper, and more. The Flitz salt-based formula is safer on surfaces than traditional acid-based cleaners and requires no scrubbing. Spray on the brass cleaner and rinse. It’s easy!
Flitz Brass & Copper Tarnish Remover is ideal for heavy tarnish and difficult calcium deposits. It removes water spots and heavy oxidation with ease.
Because Flitz Brass & Copper Tarnish Remover is so effective, it shouldn’t be used on patina, living finish, plated, or coated surfaces. But for raw copper and brass, there’s nothing better.
Tarnished copper and older brass can start to look pretty rough over the years, but cleaning with a typical commercial brass cleaner is still a challenge. You can polish and rub and still miss that original shine.
With Flitz Instant Brass & Copper Tarnish Remover, tarnished copper becomes a thing of the past. It’s the ideal cleaner for brass. It tackles tarnish and restores the warm glow that brass and copper are famous for.
Flitz Brass & Copper Tarnish Remover is Safe for Use On
Use Flitz Instant Brass & Copper Tarnish Remover throughout your house. Flitz Brass & Copper Tarnish Remover is safe for:
- Brass, Copper, Aluminum
- Glass, Painted Surfaces, Fiberglass
- Stucco, Brick, Porcelain
Flitz Brass & Copper Tarnish Remover Instantly Removes:
- Heavy Tarnish & Oxidation
- Rust, Corrosion & Water Spots
- Calcium Deposits & Stains
It brings brass, copper, and aluminum back to their full glory. These notoriously hard-to-clean surfaces can collect tarnish, rust, and calcium over time. Suddenly, a few years go by, and your prized brass and copper pieces look aged and dingy. Shine them up with Flitz Brass & Copper Tarnish Remover.
How to Use Flitz Brass & Copper Tarnish Remover
- Spray Flitz Brass & Copper Tarnish Remover directly onto the surface. (You may wish to test on an inconspicuous area first.)
- Wait briefly—do not let the Flitz Brass & Copper Tarnish Remover dry.
- Rinse off the Flitz Brass & Copper Tarnish Remover thoroughly, with plenty of water to neutralize the tarnish remover.
- Follow up with a protective polish or wax to prevent re-tarnishing and set the finish.
Do’s & Don’ts of Flitz Tarnish Remover
✔ DO use on tarnished brass, copper, and similar raw metal surfaces.
✖ DON’T use on chrome or patina finishes—this will remove patinas on oil-rubbed or hand-hammered copper. Don’t use on plated or coated surfaces.
Restore brilliance in seconds with Flitz Brass & Copper Tarnish Remover!
- Learn More About Flitz Instant Brass & Copper Tarnish Remover:
- If you’re considering Flitz Instant Brass & Copper Tarnish Remover, it’s the easy way to remove brass and copper tarnish. Use Flitz Brass & Copper Tarnish Remover to take years off your brass and copper pieces.
- ✅ Flitz Instant Brass & Copper Tarnish Remover offers Instant Tarnish Removal:
- Dissolve heavy tarnish, oxidation, rust, and water staining, without spending the day scrubbing.
- ✅ Safer Than Acid Cleaners:
- Flitz’s salt-based Brass & Copper formula won’t damage or dull raw metal surfaces.
- ✅ Easy Spray & Rinse Application:
- Cut back on your effort with an easy application. Just spray, rinse, and neutralize—no buffing required!
