Hard Water Stain Remover for Calcium, Lime & Rust Buildup
Hard water stains, calcium deposits, lime buildup and rust stains can leave surfaces looking dull and difficult to clean. Flitz Calcium, Rust & Lime Remover quickly cuts through stubborn buildup and staining on a wide variety of approved surfaces.
Use it as a powerful hard water stain remover and limescale remover for household, automotive, marine and industrial cleaning applications.
Safe to Use On:
- Chrome
- Aluminum
- Brass
- Copper
- Stainless steel
- Glass
- Fiberglass
- Painted surfaces
- Gelcoat
- Stucco
- Brick
- Porcelain
Always test on a hidden area first.
Instantly Removes:
- Calcium deposits
- Hard water stains
- Lime and limescale
- Water spots
- Rust stains
- Marine scum
- Fuel stains
- Soap scum
- Dirt
Whether you're removing hard water buildup from fixtures, calcium deposits from metal or marine grime from gelcoat and fiberglass, Flitz makes stubborn deposits easier to tackle.
How to Use Flitz Calcium, Rust & Lime Remover
- Step 1: Spray full strength onto the surface.
- Step 2: Agitate with a brush if needed.
- Step 3: Rinse immediately with water.
- Step 4: Repeat as necessary for stubborn buildup.
Do not let the product sit on the surface for longer than 1 minute.
After cleaning, Flitz Polish and Flitz Ceramic Sealant can be used where appropriate to help restore shine and protect the surface.
Do Not Use On:
- Marble
- Some granite
- Jura
- Travertine
- Patina surfaces
- Terrazzo
Always test on a hidden area first.
Calcium, Lime & Hard Water Stain Remover FAQs
What is Flitz Calcium, Rust & Lime Remover used for?
Flitz Calcium, Rust & Lime Remover is designed to remove hard water stains, calcium deposits, lime buildup, limescale, rust stains, water spots and other stubborn deposits from approved surfaces.
Can Flitz remove hard water stains?
Yes. Flitz works as a hard water stain remover, helping break down the calcium, lime and mineral buildup that can leave water spots and stubborn staining behind.
Does Flitz remove limescale?
Yes. Flitz Calcium, Rust & Lime Remover can be used as a limescale remover to break down calcium and lime deposits on approved surfaces.
Can it remove rust stains?
Yes. Rust stains are one of the deposits Flitz Calcium, Rust & Lime Remover is formulated to remove.
How long should I leave it on the surface?
Do not allow the product to sit for longer than 1 minute. Spray onto the surface, agitate with a brush if needed and rinse immediately with water.
What surfaces can I use it on?
It is suitable for chrome, aluminum, brass, copper, stainless steel, glass, fiberglass, painted surfaces, gelcoat, stucco, brick and porcelain. Always test a hidden area first.
Are there surfaces I should avoid?
Yes. Do not use Flitz Calcium, Rust & Lime Remover on marble, some granite, Jura, travertine, patina surfaces or terrazzo.
Does Flitz Calcium, Rust & Lime Remover leave residue?
When used according to the directions and rinsed thoroughly with water, the product is designed to clean the treated surface without leaving cleaning buildup behind.
Cut through hard water stains, calcium deposits, lime and rust with Flitz Calcium, Rust & Lime Remover.
- Product Features:
- Hard water stain remover for calcium deposits, lime buildup, rust stains, oxidation and mineral buildup.
- Fast-Acting Formula:
- Breaks down stubborn hard water, calcium, lime and oxidation buildup in as little as 30 seconds.
- Gentle Salt-Based Formula:
- Gentle salt-based formula removes tough deposits without harsh industrial acids.
- Safe for Many Surfaces:
- Use on glass, stainless steel, fiberglass, painted surfaces, gelcoat, chrome, brass, copper, tile and more.
- Do Not Use On:
- Marble, some granite, Jura, travertine, patina surfaces or terrazzo.
