Flitz Polish - Paste
This is our signature product. The one that launched our company over 30 years ago. A concentrated cream, Flitz Paste Polish is unsurpassed in its ability to clean, polish, de-oxidize and protect. Our German-engineered formula provides a durable polish with a tough protection. Our polish is non-abrasive, non-toxic, non-flammable, USDA authorized to consume (although it does not taste very good!) and for work on food preparation surfaces. Protects up to 6 months in fresh water; up to 3 months in salt water.
Tarnish, Rust, Water Stains, Chalking, Lime Deposits, Heat Discoloration, Lead & Powder Residue, Oxidation, Bugs, Tar, Oil, Fingerprints, Tree Sap, Bird Droppings, Graffiti, Dyes, Black Streaks/Scuff Marks.
Brass, Copper, Silverplate, Sterling Silver, Chrome, Stainless Steel, Nickel, Bronze, Solid Gold, Aluminum, Annodized Aluminum, Beryllium, Magnesium, Platinum, Pewter, Factory Hot Gun Bluing, Painted Surfaces, Formica®, Cultured Marble, Corian®, Glass, Plexiglas®, Plastics, Fiberglass, Eisenglass, and Armatel®
Not for: Electroplated finishes.
1.76 oz tube (50 gram)
5.29 oz large tube (150 gram, equals three 50g tubes in 1 large tube)
1 lb jar (453 gram, equals 3 large tubes in one jar)
2 lb can (906 gram quart, equals 6 large tubes) - BETTER VALUE
8 lb can (3624 gram gallon, equals 4 quarts) - BEST VALUE
How To Use:
Use sparingly. Do not let dry. Buff with Flitz Microfiber, Flitz Original Büff Ball or dry towel while Flitz is still moist.
Tarnished Brass, Copper, Bronze, etc: Apply Flitz with paper towel. Rub briskly, polish with soft cloth.
Tarnished Silver & Gold: Apply light coat of Flitz with soft cloth. Polish with clean dry cloth until brilliant.
Firearms: Apply light coat of Flitz with a soft cloth and polish with a clean dry cloth. Flitz will not harm factory gun bluing.
Rust & Corrosion: Apply Flitz with #0000 Steel wool. If necessary, apply pressure when rubbing. Polish with soft cloth.
Marine Corrosion: Apply Flitz using Bronze wool applying pressure while rubbing if necessary. Polish with a soft cloth.
Aluminum, Mag Alloys, & Stainless: Apply Flitz and clean with paper towel. Polish with soft cloth.
Heat Discoloration: Apply moderate coat of Flitz. Allow to penetrate 3 minutes. Rub with paper towel. Polish with soft cloth. Repeat if necessary.
Lime Deposits: Apply Flitz with stiff brush. Rub until lime is removed. Polish with soft cloth.
Fiberglass & Painted Surfaces: Apply Flitz with damp cloth. Polish with soft, dry cloth.