One product, many uses. Metal, plastic, fiberglass, glass, Corian®...
This is our signature product. The one that launched our company over 30 years ago. A concentrated cream, Flitz Polish is unsurpassed in its ability to Clean, Polish, Deoxidize and Protect. Tough,durable protection; Non-abrasive formula; Non-toxic; Non-flammable;USDA authorized; Protects up to 6 months in fresh water; up to 3 monthsin salt water.
Tarnish, Rust, Water Stains, Chalking, Lime Deposits, Heat Discoloration, Lead & Powder Residue, Oxidation, Bugs, Tar, Oil, Fingerprints, Tree Sap, Bird Droppings, Graffiti, Dyes, Black Streaks/Scuff Marks.
Brass, Copper, Silverplate, Sterling Silver, Chrome, Stainless Steel, Nickel, Bronze, Solid Gold, Aluminum, Annodized Aluminum, Beryllium, Magnesium, Platinum, Pewter, Factory Hot Gun Bluing, Painted Surfaces, Formica®, Cultured Marble, Corian®, Glass, Plexiglas®, Plastics, Fiberglass, Eisenglass, and Armatel®
Not for: Electroplated finishes.
(50 gram) 1.76 oz
(150 gram) 5.29 oz BETTER VALUE (equals three small tubes in just one large tube)
(906 gram) 2 lb (Quart) EVEN BETTER VALUE (equals six large tubes in just one quart can)
(3624 gram) 8 lb (Gallon) BEST VALUE (equals 4 quarts)
Use sparingly. Do not let dry. Buff with Flitz Microfiber, Flitz Original Büff Ball or dry towel while Flitz is still moist.
Tarnished Brass, Copper, Bronze, etc: Apply Flitz with paper towel. Rub briskly, polish with soft cloth.
Tarnished Silver & Gold: Apply light coat of Flitz with soft cloth. Polish with clean dry cloth until brilliant.
Firearms: Apply light coat of Flitz with a soft cloth and polish with a clean dry cloth. Flitz will not harm factory gun bluing.
Rust & Corrosion: Apply Flitz with #0000 Steel wool. If necessary, apply pressure when rubbing. Polish with soft cloth.
Marine Corrosion: Apply Flitz using Bronze wool applying pressure while rubbing if necessary. Polish with a soft cloth.
Aluminum, Mag Alloys, & Stainless: Apply Flitz and clean with paper towel. Polish with soft cloth.
Heat Discoloration: Apply moderate coat of Flitz. Allow to penetrate 3 minutes. Rub with paper towel. Polish with soft cloth. Repeat if necessary.
Lime Deposits: Apply Flitz with stiff brush. Rub until lime is removed. Polish with soft cloth.
Fiberglass & Painted Surfaces: Apply Flitz with damp cloth. Polish with soft, dry cloth.
I would like to compliment you on your products! I can't believe the results of the product on my vehicle!!! I have a 1971 Olds Cutlass and I am attending college at the moment so I don't have that much money to get the car painted. I saw the ad for Flitz on T.V. and noticed it at my local ACE Hardware store. I purchased a sample pack and buffed the hood with the Flitz Metal Polish and I couldn't believe the results!! I then went back to the store to by the bigger bottles and did my whole car over with it.
Jonathan Kingsbury - Canton, Mass. on 18th Feb 2013
We recommend it to our dealers and customers to clean exterior metal impurities off the surface of stainless steel as well as aluminum. Frank H. Longno, Jr., Vice President/Marketing - Grady-White Boats on 18th Feb 2013
Flitz Metal Polish and Fiberglass Cleaner makes metal and fiberglass sparkle with a minimum of elbow grease and leaves a protective coating behind to keep the shine shining. Boating Life Magazine on 18th Feb 2013
We recently had the opportunity to try the Flitz Metal Polish on the alunimum of our 26' Elite Trailer. With the help of the Buff Ball our aluminum now has a chrome-like shine!! Race Gas Snowmobile Magazine on 18th Feb 2013
We have tested Flitz Polish extensively over the past years on our snowmobiles, cars, trucks, watercraft and boats. We have found Flitz to be the best product we have seen, particularly for restoring gel-coaton fiberglass. Kent Lester - Supertrax Magazine on 18th Feb 2013